The Wii was one of the most pop habitation consoles of all fourth dimension. Information technology came out in 2008, and has AV connections available to connect the Wii panel to a Tv. However, newer TVs with many different connectedness types may crusade you a lot of defoliation if you want to play your Wii on it.

Despite what type of Telly you lot're using, there is nigh likely a way to hook the Wii up to it. Y'all may but demand to find unlike types of cables than you already have.

In the sections below, you'll discover directions for connecting the Wii using different types of cables, and any actress steps yous may need to take depending on the cables involved.

Connecting a Wii To a TV With AV Cables

Here is how to connect the Wii to a TV using AV cables, which are what the arrangement originally comes with.

  1. Find a gear up of 3 inputs on your TV which should be yellow, white and cherry-red. They may likewise be labeled every bit Video and Audio. These are your AV inputs.
  1. Insert the AV plugs according to color, and then they lucifer to the input's colour on your TV. Yellow = Video, White = Audio Left or Mono, Cerise = Audio Right
  1. On the back of the Wii is a connector for the AV Out plug on the reverse terminate of the AV cable, which you will plug it in to.
  1. Turn on your TV and find your input selection, either on your remote or Idiot box. This may exist seen as Input Select, Input, or TV/Video. And so select AV to view your Wii. Depending on your TV, these may be labeled slightly differently, such as AUX or EXT. It may as well be on aqueduct 00 or 99.

Connecting a Wii To a TV With Component Cables

With component cables, the steps for setting them up with the Wii are basically the same every bit with AV cables.

  1. There should be a set of 5 ports on your Tv set if it has the ability to connect to component cables. These ports should be two ports for audio colored red (right, or R) and white (left, or L), and three for video, colored crimson (Pr/Cr), blue (Pb/Cb), and green (Y).
  1. Connect the component cables into the corresponding colors.
  1. Connect the cable to the back of the Wii on the AV Out port.
  1. Progressive Scan volition then need to be enabled if your TV has it.
  1. Power on the Wii and detect the input pick for your TV and switch it to view the AV input.

Connecting a Wii To a TV With HDMI

The original Nintendo Wii, unfortunately, does not have an HDMI port. This doesn't necessarily mean that yous can't play it on a TV with exclusively HDMI inputs, though.

In that location are many adapters that let you to connect your Wii to an HDMI port, past plugging straight into the panel. This makes adapters like the Portholic Wii to HDMI Converter easy to apply.

  1. Connect the HDMI adapter into the dorsum of your Wii. Then insert your HDMI cable into the adapter.
  1. Locate the HDMI port on your TV, usually on the back or sides. Plug the other finish of the HDMI in.
  1. Turn on your Wii and observe the input selection on your Idiot box. Select the HDMI input y'all connected the cable to.

Connecting a Wii To a Television set With a SCART Connector

On the other hand, if yous accept a much older Television receiver with SCART connections you'd like to connect your Wii to, this can be done as well. SCART connectors besides plug into some splitters, which give you the ability to apply more than ports if needed.

As TVs supporting SCART connection have get increasingly obsolete, these connectors and adapters are few and far between. However, yous tin nevertheless purchase a SCART adapter that will hook upward to your Wii, such as this ane.

Here'due south how to use the adapter to connect your Wii to your Television receiver:

  1. Plug your Wii'due south RCA cables (the AV cables) into the end of the SCART adapter with the yellow, reddish, and white inputs with the same color plugs.
  1. Plug the SCART into your TV or splitter. Then alter the Tv input to view from this connection.

Connecting a Wii To Whatsoever Television set

With all of these unlike connections bachelor, you should exist able to connect your Wii to any Tv set out at that place. The final things you'll want to proceed in mind is that the Wii but outputs a max resolution of 480p, then don't expect to get anything more out of it on a newer boob tube.

You may also demand to modify the settings on your Wii so that it fits the screen of the TV you have it continued to. In the Wii, you can go to Settings > Wii Settings > Screen to change the screen position, and alter the resolution to EDTV or HDTV to output at 480P.

You tin can also become into the Widescreen Settings and change the setting from Standard (4:3) to Widescreen (sixteen:9) or vice-versa.